REMOVE/TEST/INSTALL LIGHT ASSEMBLY AND GLOBE.

TM 9-4110-241-13

TO 35E9-274-1

4-25. REMOVE/TEST/INSTALL LIGHT ASSEMBLY AND GLOBE.

a. Tools: Screwdriver, cross-tip; Multimeter.

b. Removal:

WARNING

Disconnect power to power receptacle before beginning this procedure.

(1) Remove screws and gently pull light assembly away from wall.

(2) Tag and disconnect wires to light assembly.

MODELS MDS1600N, TKR-600C

AND TKR-4000C

MODELS AA600PF

AA1200PFA,

AND AA4000PF

Figure 4-19. Light Assembly and Globe

c. Test:

(1) Attach a 125 VAC power source to vapor proof socket.

(2) Use a multimeter to check voltage across socket.

d. Installation:

(1) Connect wires to light assembly and remove wire tags.

(2) Mount socket onto wall using screws.

(3) Reconnect power to power receptacle.

CHANGE 1 4-41