|
| |
TM 9-4110-257-14
b.
Installation.
(1) Install fuel sender (7), five new lock washers (6), and screws (5).
NOTE
Terminal hardware is supplied with sending unit.
(2) Install two flat washers (4), and nuts (3).
(3) Using tags and wiring diagram (fig. 1-4), install wire leads (1) and secure using two self locking nuts (2). Remove
tags.
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Connect battery (para 4-35) and put unit back into service.
4-157
|
