|
| |
TM 9-4110-257-14
4-64. SENDING UNIT REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Materials/Parts:
Equipment Conditions:
Lock Washers (5)
Refrigeration unit shut down (para 2-7) and battery
1, Appendix G
disconnected (para 4-35).
Marker tags (2)
Left side condenser door open.
7, Appendix E
a.
Removal.
(1) Tag wire leads (1).
NOTE
Terminal hardware is supplied with sending unit.
(2) Remove two self locking nuts (2) and wire leads (1).
Figure 4-58. Sending Unit
(3) Remove two nuts (3), and flat washers (4).
(4) Remove five screws (5), lock washers (6) and fuel level sender (7). Discard lock washers.
4-156
|
