|
| |
TM 9-4110-257-14
NOTE
Note flow direction prior to removal.
(3)
Loosen two flare nuts (6) and remove solenoid valve (7).
b.
Installation.
NOTE
Be sure to observe flow direction noted during removal.
(1)
Install solenoid valve (7) and tighten two flare nuts (6).
(2)
Install solenoid coil (5), data plate (4), lock washer (3), and screw (2).
(3)
Using tags and wiring diagram (fig. 2-4), connect wire leads (1). Remove tags.
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Replace dehydrator (para 5-14).
Leak check (para 5-10), evacuate (para 5-11), and charge (para 5-12) the refrigeration system.
5-57
|
