|
| |
TM 9-4110-257-14
4-6. INSTALLATION INSTRUCTIONS.
a.
Tools and Equipment. Tools required to install the refrigeration unit include a wrench for tightening the
mounting angles, lifting sling(s), spreader-bar (if needed), and hoist or similar lifting device.
b.
Refrigerator Enclosure Preparation. The refrigerator enclosure must have an opening 38.00/38.06 inches
(96.52/96.67 cm) wide and 55.00/55.06 inches (139.70/139.85 cm) high (fig. 4-1) to insert the refrigeration unit. If an
opening does not already exist in the enclosure, see the enclosure manual for information on making such an opening.
Figure 4-1. Wall Opening Dimensions
c.
Installation.
(1)
Remove four nuts (1, fig. 4-2), lock washers (2), and unit mounting angles (3) if attached to the
refrigeration unit. If the mounting hardware is not attached, locate it now.
(2)
Attach the sling(s) (4) to the lifting rings (5).
4-2
|
