|
| |
TM 9-4110-257-14
Figure 4-2. Installation
CAUTION
Failure to use a spreader bar or two point lifting device,
such as a fork lift, can cause damage to the condenser
frame when lifted.
(3) If a single point lifting device is being used, install the spreader bar onto the sling(s) (4) at approximate
mid-way point.
The refrigeration unit can swing and move when lifted.
Personal injury can result if standing near unit when it is
lifted.
(4)
Connect a hoist or similar lifting device to the sling(s) (4) and lift the refrigeration unit.
(5)
Carefully position the refrigeration unit into the refrigerator enclosure opening.
NOTE
The two mounting angles with notches must go on top.
(6)
Secure the refrigeration unit to the refrigerator enclosure using four unit mounting angles (3), lock washers
(2), and nuts (1).
(7)
Remove sling(s) (4).
4-3
WARNING
|
