| |
TM 9-4110-257-14
4-14. SIDE CONDENSER DOORS AND BARREL BOLTS REPLACEMENT.
This task covers: a. Removal b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Lock Washers (9) (Each Door)
Refrigeration unit shut down (para 2-7) and
1, Appendix G
battery disconnected (para 4-35).
Lock Washers (6) (Each Barrel Bolt Assembly)
Condenser door open.
1, Appendix G
General Safety Instructions:
WARNING
Exposed rotating parts are used in the
refrigeration unit. Personal injury can result if
battery is connected.
a.
Side Condenser Door Replacement.
(1) Removal. Remove nine bolts (1), lock washers (2), flat washers (3), and door (4). Discard lock washers.
(2) Installation.
(a) Remove four bolts (5), lock washers (6), and barrel bolt (7) from old door (4). Repeat for second barrel
bolt. Discard lock washers.
(b) Install barrel bolt (7), four new lock washers (6), and bolts (5). Repeat for second barrel bolt.
(c) Install door (4), nine flat washers (3) new lock washers (2), and bolts (1).
b.
Barrel Bolt Replacement.
(1) Removal.
(a) Remove four bolts (5), lock washers (6), and barrel bolt (7). Discard lock washers.
(b) Remove two screws (8), lock washers (9), barrel bolt clip (10), and shim (11). Discard lock washers.
4-39
|