|
| |
TM 9-4120-367-14
TM 07592B-14/1
5.23 FRESH AIR SCREEN. - Continued
Figure 5-25. Fresh Air Screen
Location/Item
Action
Remarks
Cleaning
b. Agitate until dirt is removed, using a soft brush if
- Continued
necessary to loosen caked-on dirt.
c. Rinse in clear water or clean dry cleaning solvent.
d. Drain, then hold horizontal and tap each edge on
bench or floor to dislodge droplets.
lnspection
a. Inspect for damage such as perforations or punc-
tures.
b. Inspect for areas of packed or crushed material
that would obstruct airflow.
c. Check for deformation of the frame and straighten.
d. Replace if crushed, punctured, badly deformed, or
broken.
Installation
Bolt screen to frame using two screws and washers.
5-74
|
