| |
TM 9-4120-367-14
TM 07592B-14/1
6.24 CONDENSER FAN AND MOTOR. - Continued
Location/Item
Action
Remarks
Installation
c. Secure motor and fan to plate using four screws,
Continued
washers, bushings and grommets.
d. Place motor and plate in the air conditioner
frame.
e. Slide bell inlet over motor shaft (MHP-20-4-08).
f. Slide shaft adapter or collar onto motor shaft.
g. Secure with setscrew.
h. Press fan onto motor shaft and secure with set-
screw.
i.
Mount bell inlet to scroll using four screws.
j.
If necessary, lift fan and motor out and change
size of motor mount bushings.
k. Secure motor and plate to frame using four
screws and washers.
1. Connect motor electrical connector.
m. Replace top cover.
.
6-85
|