|
| |
ARMY TM 9-4120-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
13.
Install rotor drive key (8) on eccentric shaft.
14.
Place thrust washer (9) on eccentric shaft (7) in mounting position.
15.
Install thrust pin (10).
CAUTION
Support rotor while it is being installed to prevent stator damage.
16.
Install rotor (11) on eccentric shaft (7).
NOTE
Block shaft with a piece of wood if shaft turns preventing tube assembly from being installed.
17.
Install equalizer tube assembly (18) and lockwasher (12).
18.
Install filter strainer (13).
19.
Position motor end gasket (17) and cover (14) in mounting position.
20.
Install 18 cap screws (15) and gasket (16), and torque to 25-30 ft-lb.
21.
Install tube assembly (23) and (29).
22.
Install oil filter screen assembly (24).
23.
Position bottom plate gasket (25) and plate (28) in mounting position.
24.
Install 22 cap screw gaskets (26) and screws (27), and torque to 25-30 ft-lb.
FOLLOW ON PROCEDURE
1.
Install pump end bearing assembly (para 5-48).
2.
Install valve plate assembly (para 5-47).
3.
Install compressor into air conditioner (para 5-46).
5-117
|
