|
| |
ARMY TM 9.4120-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
6-10. REAR CONDENSER PANEL- Continued.
REPAIR - Continued.
b.
Clean area for new gasket, using acetone or MEK and a stiff brush.
c.
Coat surfaces of metal and gasket with adhesive. Let both surfaces dry until adhesive is tacky but will not stick
to fingers.
d.
Starting with an end, carefully attach gasket to metal surface. Press into firm contact all over.
Figure 6-5. Rear Condenser Panel
INSTALLATION
1.
Place panel (4) in mounting position.
2.
Install 42 screws (1), lockwashers (2), and flat washers (3).
FOLLOW ON PROCEDURE
1.
Install condenser air out RFI filter (para 6-12).
2.
Install condenser air in RFI filter (para 6-13).
6-12
|
