|
| |
ARMY TM 9-4120-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
e.
Install ten rivets (5).
f.
Install receptacle (7) with two rivets (6).
Figure 4-27. Left Front Evaporator Panel
2.
Gasket.
a.
Remove captive fasteners.
b.
Remove damaged gasket (2) from panel (3).
WARNING
Acetone and Methyl-Ethyl Ketone (MEK) are flammable and their vapors can
be explosive. Repeated or prolonged skin contact or inhalation of vapors
can be toxic. Use a well ventilated area, wear gloves, and keep away from
sparks or flame.
c.
Clean area for new gasket, using acetone or MEK and a stiff brush.
d.
Coat surfaces of metal and gasket with adhesive. Let both surfaces dry until adhesive is tacky but will not stick
to fingers.
e.
Starting with an end, carefully attach gasket to metal surface. Press into firm contact all over.
f.
Install captive fasteners.
4-39
|
