|
| |
ARMY TM 9-4120-381-14
NAVY EE-000- CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
4-23. LEFT FRONT EVAPORATOR PANEL - Continued.
3.
Insulation.
a.
Remove fresh air inlet hose and filter box (para 4-24), if necessary.
b.
Remove damaged section of insulation (9).
c.
Clean area for new insulation, using acetone or MEK and a stiff brush.
d.
Cut replacement insulation to fit.
e.
Coat surfaces of metal and insulation with adhesive. Let both surfaces dry until adhesive is tacky but will not
stick to fingers.
f.
Starting with an end, carefully attach insulation to metal surface. Press into firm contact all over.
g.
If insulation retainer (8) is removed, install new insulation retainer (8) with rivet (10).
4.
Captive Fasteners.
a.
Remove split ring retainer (11), fastener (14), thermoplastic wear washer (12), and ejector spring (13).
b.
Install ejector spring (13), thermoplastic wear washer (12), fastener (14), and split ring retainer (11).
INSTALLATION
1.
Position panel (3) in place.
2.
Install hose (16) and tighten clamp (15).
3.
Tighten five captive fasteners (1).
FOLLOW
ON
PROCEDURES
1.
Install center front evaporator panel (para 4-22).
2.
Connect air conditioner input power at source.
4-40
|
