|
| |
TM 9-4120-389-14
d.
Installation
(1)
Remove nut and lockwasher from replacement switch.
(2)
Slip switch into control module and place shaft through hole.
(3)
Holding backside of switch, secure switch to housing with lockwasher and nut.
(4)
Place knob on shaft and align setscrew on shaft.
(5)
Tighten setscrew.
(6)
See tags and wiring diagram (FO-1) and reconnect wire leads. Remove tags.
Follow-on procedures:
1.
Install cover (See para. 4-44).
2.
Install control module (See para. 4-38).
4-130
|
