|
|
TM9-4120-423-14&P
DISASSEMBLY
Evaporator/Condenser Assembly Separation and Reconnection
P2 CONNECTOR
LOW PRESSURE
LINE CONNECTOR
P9A CONNECTOR
HALF
COUPLING
HIGH PRESSURE
LINE CONNECTOR
ACCESS (COVER REMOVED)
FLAT WASHER (4)
EVAPORATOR ASSEMBLY
LOCK WASHER (4)
(REF)
CAP SCREW (4)
CONDENSER ASSEMBLY
CONNECT/DISCONNECT
(REF)
TYPICAL REFRIGERATION
LINE CONNECTION
1
Using socket or combination wrench, remove four each hex head cap screws, lockwashers, and
flat washers that hold the evaporator and condenser assemblies together.
2
Disconnect the P9A connector.
3
Disconnect the P2 connector.
4
Using open end wrenches, carefully disconnect the low and high condenser to evaporator
refrigerant metal hose line connectors from the evaporator assembly half couplings.
5
Carefully pull the evaporator assembly away from the condenser assembly.
0014 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |