 |
|||
|
|
|||
|
Page Title:
CHASSIS, EVAPORATOR ELECTRICAL MODULE |
|
||
| ||||||||||
|
|
 TM9 4120-423-14&P
CHASSIS, EVAPORATOR ELECTRICAL MODULE
THIS WORK PACKAGE COVERS:
Inspection of Installed Items
Repair or Replacement
Tools and Special Tools
Drill
Personnel Required
Unit Technician
Equipment Conditions
Evaporator top cover removed (See
Evaporator section electrical module
assembly removed. (See WP0032.)
Electrical module top cover removed. (See
INSPECTION OF INSTALLED ITEMS
1
Check that chassis is not cracked, broken, or badly dented. Replace if damaged.
2
Check that blind nuts are in place and secure. Replace if loose or missing.
REPAIR OR REPLACEMENT
1
Repairs are limited to replacement of blind nuts.
2
Remove components from area to be repaired.
3
Blind nuts may be removed by drilling them out using a drill bit slightly smaller than the body
diameter of the blind nut. A new one must then be installed.
4
Should it become necessary to replace the chassis, see WP0033 through WP0039 for removal
and installation of internal components.
0040 00-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals