 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-4120-423-14&P
2
Carefully remove the front condenser cover.
3
Using screwdriver, remove fifteen screws from top condenser cover.
4
Carefully remove the top condenser cover.
5
Untie and roll fabric cover down.
6
Using screwdriver, remove the three screws.
7
Carefully remove fabric cover.
CLEANING
1
Wash fabric cover with a solution of mild detergent and clear water.
2
Rinse thoroughly with clear water.
3
Dry prior to installation.
REPAIR OR REPLACEMENT
NOTE
Prior to removal of old gasket material or insulation, cut the new replacement material to
size using the old item as a sample.
1
Remove as much old gasket or insulation material as possible by pulling or scraping it away
from the metal surface.
WARNING
Dry Cleaning Solvent is flammable, and its vapors can be explosive. Repeated
or prolonged skin contact or inhalation of vapors can be toxic. Use a well-
ventilated area, and keep away from sparks or flame. Use goggles, gloves, and
apron when appropriate.
2
Soften and remove old adhesive and gasket residue, using dry cleaning solvent and a stiff brush.
3
To remove floating nut plates, use a drill bit slightly smaller than the diameter of the rivet being
removed.
4
Drill the rivets out and remove the old plate nut.
5
Align holes in replacement plate nut and cover and install new rivets.
0044 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals