 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-425-14&P
JUNCTION BOX ASSEMBLY UNIT MAINTENANCE - Continued
0035-00
Figure 1
WARNING
Disconnect air conditioner power supply.
REMOVAL AND INSPECTION
Temperature Selector Switch Electronic Probe (Figure 1)
1.
Loosen screw (1) and washers (2) to release electronic probe (4) from clamp (3) on evaporator fan assembly (5)
located under left scroll (7).
2.
Carefully slide out probe from clamp.
Junction Box (Figure 2)
1.
Inspect junction box for damage.
2.
Inspect all designation plates and instruction plates for damage and illegibility on front panel of junction box.
3.
Replace damaged designation markings, instruction plates and designation plates. See WP 0025-00.
4.
Remove eight screws (8) and eight lockwashers (9) that secure the junction box to the unit housing
5.
Partially remove the junction box by pulling it forward and out of the air conditioner. Care must be taken with the
wiring.
6.
Support the junction box to relieve strain on wiring.
0035-00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals