INSPECTION - TM-9-4120-428-140164

TM 9-4120-428-14

0043 00

INSPECTION

1. Check all terminals on the terminal board. Ensure they are tight and free of corrosion.

2. Disconnect the connectors and check for loose, damaged, or missing pins.

3. Check individual wires for loose solder connections, cut or frayed insulation, and cut or broken wires.

TESTING

See WP 0028 00, Wiring Diagram. Perform continuity tests on individual wires. Repair or replace wires with no

REPAIR

1. See WP 0028 00 for general wire repair instructions.

2. See WP 0028 00, Wire List. When replacing individual wires, check for wire lengths and terminal information.

REPLACEMENT

Replace individual wires, connectors, or terminal boards if defective.

INSTALLATION

Connect all disconnected connectors

NOTE

FOLLOW-ON MAINTENANCE:

Install Junction Box (WP 0036 00)

Install Top Panels (WP 0019 00)

END OF WORK PACKAGE

0043 00-2