INSTALL - TM-9-4120-430-140129

TM 9-4120-430-14

0027 00

NOTE

Perform removal of connectors only if assured that they are damaged and need replacement.

5. Secure circuit breaker (9 or 10) and weather boat (6 or 18) to mounting bracket (3 or 4) with screws (7) and flat

washers (8).

Connector J2 (17)

1. Remove one screw (11) and nut (12) that attaches eyelet of J2 cover wire (13).

2. Remove three screws (14) and nuts (15) to remove connector J2 (17) and cover (16).

2. Tag wires, desolder and replace connector J2 (17).

3. Secure connector J2 (17) to mounting bracket (3 or 4) with three screws (14) and nuts (15).

4. Install one screw (11) and nut (12) to attach eyelet of J2 cover wire (13).

INSTALL

1. Place circuit breaker mounting bracket (3 or 4) into position on rear of housing. Connect leads to circuit breaker (9

or 10).

2. Secure circuit breaker mounting bracket (3 or 4) with screws (1).

3. Install top cover. See WP 0018 00.

0027 00-3