 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-430-14
0033 00
2. Secure the capacitor mounting plate (17) to the inside bulkhead of unit housing with four lockwashers (16) and
screws (15).
Current Sensing Relay
1.
Position current sensing relay (14) onto capacitor mounting plate (17) and secure with two lockwashers (13) and
screws (12).
2.
Verify labels on wires to wiring list (WP 0038 00) and reconnect wire leads.
Compressor Start Capacitor (C3)
1.
Install good capacitor (C3) (7) in strap (5).
2.
Tighten screw (4) with lockwasher (5) attaching capacitor (C3) (7) and strap (6) to capacitor mounting plate (17).
3.
Refer to wiring list (WP 0038 00) and reconnect wiring leads.
Compressor Run Capacitor (C4)
1.
Install good compressor run capacitor (C4) (11) into strap (10).
2.
Tighten screw (8) with lockwasher (9) attaching capacitor (C3) (11) and strap (10) to capacitor mounting plate (17).
3.
Refer to wiring list (WP 0038 00) and reconnect wiring leads.
Capacitor Assembly Cover
1.
Position hooking edge of capacitor cover (3) onto capacitor mounting plate (17).
2.
Install two screws (1) with lockwashers (2) that secure the capacitors cover (3) to the capacitor mounting plate (17).
3.
Install evaporator air intake louver (WP 0023 00).
4.
Install the lower housing plate (WP 0028 00).
0033 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals