Installation of Slide Kit, Exhaust Kit, and Supplemental Kit - continued

MWO 55-8115-202-40-1

Operating Procedures (SOPs) regarding CARC paint. (Also see CARC paint warnings at the

beginning of Item 10a. Modification Procedures and 10b. Touch-up references for CARC Paint.)

It is possible to grind off only the welds and remove the lip, and then grind the leftover weld flush.

(3) Cut, torch or grind off generator stops flush with base. They are located on the horizontal

bottom frame member at end wall (Figures 1A and 1B).

FIGURE

4.2B

STOPS

LIP

FIGURE

4.2B

Figure 1A

Figure 1B