Installation of Slide Kit, Exhaust Kit, and Supplemental Kit - continued

MWO 55-8115-202-40-1

Figure 3

(6) Remove existing exhaust system (Figure 4) in accordance with TM 55-8115-202-14,

Paragraph 4-60, Figure 4-13 and TM 55-8115-202-24P, Figure 8.

Existing

Exhaust

Figure 4

(7) Hold or secure the vertical shield (Item 2.6, part number 30741-100) onto the inside corner of

vertical end post (Figure 5A and 5B) and use as a locator. Push shield up until its top mounting

flange hits the underside of the top horizontal cross member. The corner gusset will be inside of

the shield. Utilizing the existing shield holes as a template, mark eight (8) holes (Figure 5C) onto

the vertical corner member and one (1) hole on the horizontal top member.