Figure 14

MWO 55-8115-202-40-1

Figure 13B

(17) Remove generator mount and slide assembly and finish drilling six (6) holes with the 9/32"

bit.

(18) To align the generator mount and slide assembly for the remaining holes, put bolts through

slide brackets in the six (6) holes already drilled. Depress the protruding locking bars on the front

of the slides and pull out the generator mount to expose the mount brackets. Utilizing the mount

bracket holes as a template, locate and mark the six (6) inside holes (Figure 14) by drilling with a

bit that fits inside of the template holes with little contact.

Figure 14