AC HEATER/EVAPORATOR BLOWER DOES NOT OPERATE - continued

DRAFT

TB 9-2320-364-13&P-1

AC HEATER/EVAPORATOR BLOWER DOES NOT OPERATE - Continued

WARNING

Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before working around

vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry or tools may short

across electrical circuits or terminals and cause damage to equipment or severe burns or

electrical shock to personnel.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

VERIFY REPAIR

(1) If removed, install cover and four screws, washers,

and lockwashers on AC heater/evaporator

(2) If removed, install two upper plenums

(TM 9-2320-364-20).

(3) If removed, install heater compartment access

panel and eight screws (TM 9-2320-364-20).

(4) If removed, install left ECB cover and six screws

(TM 9-2320-364-20).

(5) Turn engine start switch ON (TM 9-2320-364-10).

(6) Verify AC heater/evaporator blower operation

(a) If AC heater/evaporator blower does not

operate, fault is not corrected. Turn fan control

and engine start switch OFF and notify

Supervisor.

(b) If AC heater/evaporator blower operates, fault

has been corrected.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC160

END OF WORK PACKAGE

0010-11/(0010-12 blank)