DIRECT SUPPORT MAINTENANCE ADVANCED DESIGN REFRIGERATOR, 300 CUBIC FOOT (ADR-300)

TM 10-4110-262-13&P

0025 00

DIRECT SUPPORT MAINTENANCE

ADVANCED DESIGN REFRIGERATOR, 300 CUBIC FOOT (ADR-300)

4110-01-465-4158 / 4110-01-465-4564

INSULATED CONTAINER

REPAIR

INITIAL SETUP

Personnel Required

Tools and special tools

Direct Support Maintenance

Tool Kit, Organizational Maintenance

(WP 0051, Table 2, Item 4)

References

Disk Sander (WP 0051, Table 2, Item 1)

None

Materials and Parts

Equipment Conditions

Isopropyl alcohol (WP 0068, Item 9)

ADR-300 set is disconnected from power

Body Filler (WP 0068, Item 4)

source (See WP 0005 00 for set-up

Sand Paper (WP 0068, Items 18, 19, or 20)

procedures)

Mixing containers (non plastic) (WP 0068,

Item 12)

Putty Knife (WP 0068, Item 14)

GENERAL

The side and roof panels of the ADR-300 include an aluminum outer skin, a foam core and a fiberglass

inner skin. The entire perimeter (outside edge) of each panel is framed by fiberglass frames that also

provide reinforcement at regular intervals across the width of the panels. This work package describes

procedures for repairing damage to the skin and foam core of the panels.

Damage to the internal reinforcing elements or damage areas larger than those described in this work

package should not be attempted in the field. Damage of this magnitude should be repaired only by

factory trained technicians at a manufacturer-approved facility.

EXCLUDED REPAIR OPERATIONS

WARNING

Failure to comply with instructions regarding lifting ring

assemblies could result in catastrophic failure of the shelter

during operation. This could result in serious injury or

death.

The following repair operations are not authorized for field implementation. These repairs may only be

completed by manufacturer-authorized personnel at approved facilities:

Folding step replacement

Lift ring replacement

Hinge Butt Replacement

0025 00-1