REFRIGERATION UNIT COMPRESSOR

TM 10-4110-262-13&P

0033 00

DIRECT SUPPORT MAINTENANCE

ADVANCED DESIGN REFRIGERATOR, 300 CUBIC FOOT (ADR-300)

4110-01-465-4158 / 4110-01-465-4564

REFRIGERATION UNIT COMPRESSOR

REMOVE/INSTALL

INITIAL SETUP

References

Tools and special tools

None

Tool Kit, Refrigeration Service

(WP 0051 00, Table 2, Item 5)

Equipment Conditions

ADR-300 shut down and disconnected from all

Materials and Parts

power sources.

Personnel Required

HVAC Technician (MOS 52C, AFSC 3E1x1) (2)

NOTE

The following procedures involve servicing the refrigeration system.

Some of these service procedures are regulated by Federal, and in some

cases, by State and Local laws. All regulated refrigeration service

procedures must be performed by an EPA certified technician, using

approved equipment and complying with all Federal, State, and Local

laws.

NOTE

It is generally good practice to replace the filter dehydrator whenever the

high side is opened or when the low side is opened for an extended

period of time.

NOTE

Keep the compressor ports and open refrigerant lines covered to prevent

contaminating the system components.

REMOVE

1. Remove the condenser top and front grilles and the bottom panel from the refrigeration unit.

2. Recover the refrigerant charge from the system.

3. Disconnect the discharge and suction hoses.

0033 00-1