INSTALL - TM-10-4110-262-13-P0216

TM 10-4110-262-13&P

0038 00

INSTALL

CAUTION

Ensure that no excess sealant enters into the refrigeration system.

Sealant may cause a restriction to the refrigeration system. Failure to

comply may result in damage to the equipment.

NOTE

Copper-to-steel soldering connections require silver solder and flux.

1. Prepare all refrigerant lines for soldering.

2. Position the receiver tank in the unit and install the mounting clamp.

3. Solder the refrigerant line to the receiver tank.

4. Install a new dehydrator in accordance with WP 0037 00.

5. Leak check and evacuate IAW 0031 00.

6. If no leaks are found, recharge and check system operation in accordance with WP 0031 00.

Mounting

Clamp

Receiver

Tank

Coil

END OF WORK PACKAGE

0038 00-2