TM 10-8145-222-23
0078
REPAIR CONTINUED
7. Remove two nuts and washers from the 1EHR or 2EHR relay and remove the relay.
8. Install the new relay by reinstalling the two nuts and washers.
9. Reconnect the 11 wires (Figure 15, Item 5) to the relay as tagged.
10. Reinstall the UFR1/UFR2 module.
11. Reinstall the two relays (if previously removed) back into the UFR1/UFR2 module.
12. Close the MP control panel door and bolt shut with two bolts.
13. Insert pin to secure temperature recorder.
14. Reconnect the battery.
Figure 15.1