Figure 5-15. Step 1 Seal Assembly Installation

TM5-4110-234-14

TO 40R7-5-7-1

(5) Using seal cover plate, push seal assembly on crankshaft until spring guide is tight against shaft shoulder.

(Do not use cover plate bolts to push seal into position.) Remove cover plate being careful not to damage carbon washer.

Figure 5-16. Step 2 Seal Assembly Installation

(6) Be sure that driving band lugs are positioned in center of seal retainer shell slots. Lubricate carbon washer

seal seat. Reinstall cover plate, drawing bolts down evenly to prevent damage to carbon washer. (See fig. 5-17.)

Figure 5-17. Step 3 Seal Assembly Installation

5-38