|
| |
5-19. Condenser Coil
a. Removal. Remove condenser coil as follows:
(1) Refer to paragraph 6-3 and discharge the
refrigerant system.
(2) Refer to paragraph 4-21 and remove
housing top covers.
(3) Refer to figure 5-4 and remove screw that
secures bulb well loop clamp to condenser coil
angle.
(4) Disconnect tubing from condenser coil and
remove other tubing and fittings as required.
(5) Refer to paragraph 4-20 and remove
condenser guard.
(6) Remove four countersunk-head screws that
securecoil to base of housing.
(7) Remove coil from air conditioner. Use care
when removing coil to prevent damage to coils and
fins.
(8) To remove angle from coil, grind off four
rivets.
Figure 5-4. Condenser coil. removal and installation.
5-8
|
