Identification and Tabulated Data - TM-5-4120-282-130022

(5) Service valves (liquid and suction).

(6) A sight glass.

(7) A liquid line dryer.

serves power to the condenser fan on

It also contains a fan motor that

the other end. The unit (fig. 1) is

one end and the evaporator fan on

through a selector (OFF-FAN-COOL)

operated either on fan or cooling

controls the temperature to the de-

switch, and has a thermostat that

sired setting.

b. Evaporator Blower Section. The fan of the evaporator circula-

tion system is an integral part of the evaporator section and distri-

butes either cooled or fresh air or filtered air as demanded by the

cycle in which it is operating.

c. Condenser Blower Section. The heat generated by the compression

of the gas is expelled by the movement of the air over the condenser

coil by the condenser blower.

4. Identification and Tabulated Data

a. Identification.

(1) The air conditioner identification plate located on the out-

side panel, specifies nomenclature, manufacturer, model, FSN, serial

number and capacity.

(2) The compressor plate specifies manufacturer, model, voltage

(3) The fan motor plate specifies manufacturer, model, type,

voltage and amperes, horsepower and r.p.m.

b. Tabulated Data. Air conditioner, floor mounted, electric motor

driven, 3/4 hp, 60 cycle, AC, single phase, 115 volt, 9000 B.t.u.

(1) FSN 4120-592-4645.

Manufacturer ---------------------- Harvey W. Hottel

Model -------------------------------- HAC-750-H

Serial number range --------------- 1001 thru 1756 and 2001 thru 3500

and lO,OOO through 10,600

(2) FSN 4120-679-2669.

Manufacturer ----------------------- Keco

Model ---------------------------- F-9000 and F-9000-2

Serial number range --------------- 59076 thru 59261 and 65036 thru 65185