Condenser Fan.

TM 5-4120-356-14

(b) Remove the evaporator air intake grille and air filter. (See

( 2 ) I n s p e c t . I n s p e c t the fan and/or ring for evidence of damage which

would

impair serviceability.

( 3 ) R e p l a c e . R e p l a c e fan and/or ring if damaged to an extent that ser-

viceability would be impaired.

(4)

Installation.

( a ) R e f e r t o figure 330 and install evaporator fan.

(b) Reinstall evaporator air intake grille and air filter. (See

.b .

Condenser Fan.

(1) Removal.

( a ) T u r n s e l e c t o r s w i t c h t o t h e " O F F " position and disconnect the

air conditioner from the electrical power source.

( b ) Loosen attaching screws and r e m o v e condenser fan guard. (See

(2) Inspect.

I n s p e c t the condenser fan for evidence of damage which

would

impair serviceability.

( 3 ) R e p l a c e . R e p l a c e condenser fan if damaged to an extent that ser-

viceability would be impaired.

(4)

Installation.

(a) Install the condenser fan in accordance with the procedures

s h o w n in figure 3-30.

(b) Reinstall the condenser fan guard and secure with attaching

s c r e w s . (See figure 3-3. )

Fan Motor.

(1) Removal.

(a) Turn the selector switch to the "OFF" position and disconnect

the air conditioner from the electrical power source.

(b) Remove the evaporator air intake grille, air filter and con-

denser fan guard in accordance with figures 3-3 and 3-4.

( c ) Refer to figure 3-30 and remove condenser fan and evaporator fan.

( d ) Refer to figure 3-31 and remove the condenser fan.