EVAPORATOR COIL (CLEANING). - TM-5-4120-383-140153

TM5-4120-383-14

4-36.

CONDENSER FAN, MOTOR, AND HOUSING.-Continued

(15) Slide motor shaft extension onto motor shaft and secure

with two setscrews.

(16) Spin fan by hand and check for equal clearance between

the inlet ring and outer edges of fan. Adjust mounting plate as

necessary.

(17) Tighten cap screws in motor mounting plate and check that

fan rotates freely and has adequate clearance.

(18) Connect P4, P5, P6, P8, and P9 connector plugs and secure

cable and harnesses with new plastic tie down straps or lacing

cord.

(19) Install three top covers (para 4-11).

(20) Connect power at power source.

EVAPORATOR COIL (CLEANING).

The evaporator coil is located in the upper front section of the

air conditioner.

Evaporator Coil