 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-4120-384-14
4-11. TOP COVERS. - Continued
c. Inspect. Inspect top covers for breaks, cracks, dents,
loose, or missing mounting hardware or other defects.
Refer
repairs or replacement to direct support maintenance.
d.
Installation.
(Models F18H-3S and F18H-1S)
(1)
Install
center
cover
first
and
secure
with
seven
screws.
(2)
Install
front
and
rear
top
covers
and
secure
with
twenty
screws.
(3)
Install
fabric
cover
(4)
Connect
power
at
power
source.
Installation.
(Models F18H-3SA and F18H-3SB)
(1)
Install
top
cover
and
secure
with
thirty
six
screws.
(2)
Install
fabric
cover
(3)
Connect
power
at
power
source.
4-12. SCREENS AND GUARDS.
The condenser air inlet guard is located on the center rear of the
unit.
The fresh air ventilation guard is located on the lower left
rear of the unit.
(See fig. 4-9.)
When the unit is to be operated in a chemical/
biological/radiological (CBR) environment the fresh
air opening must be sealed or connected to an
appropriate CBR filtering device.
Death or injury
may result from failure to observe this warning.
4-41
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals