4-31.1. (MODEL F18H-1S ONLY) CAPACITORS - CONDENSER RUN (C-2), <a href="http://firecontrolman.tpub.com/14104/css/Evaporator-181.htm">EVAPORATOR</a> RUN (C-3), COMPRESSOR START (C4), COMPRESSOR RUN (C-5) AND RELAY; COMPRRSSOR START (KS). (Cont)

TM5-4120-384-14

CAPACITORS - CONDENSER RUN (C2), EVAPORATOR RUN (C3),

4-31.1.

COMPRESSOR START (C4), COMPRESSOR RUN (C5) AND RELAY:

COMPRESSOR START (KS) APPLICABLE TO F18H-1S ONLY.

(Continued)

Capacitor

(C2,

and

C5)

Removal.

(1)

Remove

protective

boot.

(2)

Tag

and

disconnect

wire

leads.

(3) Using screwdriver, remove four screws and lock washers

and

two straps from capacitor.

(4)

Remove

capacitor.

Capacitor

(C4)

Removal.

(1)

Remove

capacitor

and

cap

from

spring

type

retainer.

(2)

Remove

cap

and

tag

and

disconnect

wire

leads.

Relay

(K5)

Removal.

Tag

and

disconnect

wire

leads.

(1)

remove

screw

and

pull

relay

away

from

Using

screwdriver,

(2)

bulkhead.

Install

Capactiors

(C2,

C3,

and

C5).

(1)

Position

capacitors

and

straps.

secure

straps

with

two

each

screws

and

(2) Using

screwdriver,

lock

washers.

(3)

Position

protective

boots

wires.

(4)

See

wiring

diagram

(figure

4-4)

and