|
| |
TM5-4120-387-14
b.
Inspect-ion
(1) Check that panel is not bent, cracked, or punctured.
(2) Check that gaskets are not torn, loose, or missing.
(3) Check that wiring diagram plate is readable and in place.
(4) Refer all repairs to your supervisor and Direct Support Maintenance.
c.
Installation
(1) Set the bottom of the panel in position so that the flange is inside
the lip on the cabinet base.
(2) Push the top of the panel back into position.
(3) Using screwdriver, secure panel to casing with two captive panel
fastener screws.
Follow-on procedure:
Connect power cord.
4-25. CONDITIONED AIR FILTER
Figure 4-21. Conditioned Air Filter
4-66
|
