SITE AND SHELTER REQUIREMENTS.

TM 9-4110-241-13

TO 35E9-274-1

NOTE

Do not lock wall panels to ceiling panels until all ceiling panels have been locked

together.

(f) Place ceiling panels in position and lock together.

(g) Lock wall panels to ceiling panels starting in any corner and continuing around to the beginning point.

Lock the barrel bolts of the partition walls to ceiling.

(h) Cover all wrench holes with plugs.

(i) Seal exterior ceiling joints and exterior joint between ceiling and wall panels with four inch tape,

specification number PPP-T-60, Type IV, Class 1 (App E Item 9), furnished with each refrigerator.

(j) Replace wrenches on to clips in "D" panels (figure 4-1, detail A).

b. Installation of Separately Packed Components.

(1) Install the floor racks in their proper position in the refrigerator.

(2) Refer to para. 4-24 and install the light as instructed.

(3) Refer to para. 4-27 and install the thermometer as instructed.

NOTE:

CONNECT THE REMAINING PANELS IN THE SAME MANNER.

NOTE:

INSTALL METAL PLUG IN CLAMP ASSEMBLY HOLE.

Figure 4-2. Clamp Assembly

4-4