|
|
TM 9-4110-241-13
TO 35E9-274-1
Table 4-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3.
NEITHER PILOT LIGHT NOR LIGHT ASSEMBLY LIGHT WORKS WHEN SWITCH IS ON. (Cont)
Step 5.
If voltage is not present, use a multimeter to check continuity of wire between switch and receptacle.
MODELS AA600PF,
AA1200PFA,
MODELS MDSI600N, TKR-600C
AND AA4000PF
AND TKR-4000C
Step 6.
(Models AA600PF, MA1200PFA, and M4000PF). Test receptacle using the instructions in paragraph
Replace receptacle, if defective.
Step 7.
(Models MDS1600N, TKR-600C, and TKR-4000C). Test male receptacle using the instructions in
Replace male receptacle, if defective.
Step 8.
(Models AA600PF, M1200PFA, and AA4000PF). Test the electrical plug using the instructions in
Replace electrical plug, if defective.
Step 9.
(Models MDS1600N, TKR-600C, and TKR-4000C). Test the female receptacle using the instructions
Replace the female receptacle, if defective.
4-22 CHANGE 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |