| |
TM 9-4110-257-14
b.
Installation.
(1)
Install key (5) then slide pulley (3) and bushing (2) onto engine shaft (4). Aline bushing over key.
(2)
Install key (6) then aline pulley (3) with key and slide onto bushing (2).
(3)
Install three bolts (1) and tighten evenly to secure pulley (3) to bushing (2).
NOTE
FOLLOW-ON MAINTENANCE:
Install V-belts onto pulley and engine, then adjust (para 4-38).
Connect battery (para 4-35) and put unit back into service.
4-107
|