| |
TM 9-4110-257-14
5-21.
PRESSURE REGULATOR VALVE (CRANKCASE) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Insulation Tape
10, Appendix E
Equipment Conditions:
Refrigeration system discharged (para. 5-7) and purged (para. 5-8).
Right side condenser door open.
a.
Removal.
(1) Remove insulation (1).
(2) Purge (para. 5-8) and de-braze (para. 5-9) two fittings (2) from pressure regulator valve (3).
Figure 5-17. Pressure Regulator Valve
5-45
|