|
| |
TM 9-4110-257-14
Table 2-2. Operator Preventive Maintenance Checks and Services for Model F10000RD-Continued
Location
Item
Item to
Not Fully Mission
No.
Interval
Check/
Procedure
Capable if:
Service
7
Before
Engine
Inspect engine.
a.
Check for fluid leaks.
Any fuel leak or class III
oil leak is found.
b.
Service engine by checking oil level. Oil
Oil level is below the
level is at the lower MINIMUM mark or
lower MINIMUM mark
below on the dipstick. Add oil to second
on the dipstick.
MAXIMUM mark. If temperature is above
104° F (40° C) use (item 26, appendix E), if
temperature is between 5° F (-15° C) and
104° F (400 C) use (item 5, appendix E), if
temperature is below 5° F (-15° C) use
(item 25, appendix E).
8
Before
Air Cleaner
Inspect for missing or damaged air cleaner and
Damaged or missing air
attaching hardware.
cleaner and attaching
hardware.
9
Before
Fuel Lines
Inspect fuel lines (hoses) for cuts, cracks, and
If fuel lines (hoses) are
any leaking.
cut, cracked, or leak is
found.
10
Before
Fuel Pump
Inspect fuel pump for any cracks or leaks.
Fuel pump cracked or
leak found.
11
Before
Fuel Filters
Inspect both fuel filters for any dents, cuts, or
Fuel filter is dented, cut,
leaks.
or leak is found.
12
Before
Oil Filter
Inspect oil filter for any dents, cuts, or leaks.
Oil filter is dented, cut,
or class III leak is found.
2-12
|
