 |
|||
|
|
|||
|
Page Title:
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) |
|
||
| ||||||||||
|
|
 TM 9-4120-425-14&P
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Continued
0011-00
Table 1. Operator Preventive Maintenance Checks and Services (PMCS)
NOTE
Within designated intervals, these checks are to be performed in the order listed.
ITEM TO BE
EQUIPMENT NOT
ITEM
CHECKED OR
READY/AVAILABLE
NO.
INTERVAL
SERVICED
PROCEDURE
IF:
Ground Stud
Ensure unit is grounded with stud near
Before
Unit not grounded.
1
control module.
Panels and Covers
Inspect for security of attachment and
Before
Panels or covers
2
cleanliness. Report damaged condition
missing or severely
to Unit Maintenance personnel.
damaged.
Fresh Air Filter
Inspect for cleanliness, obstructions and
Before
Filter obstructed,
3
insecure mountings. Remove
damaged, loose,
obstructions.
missing or requires
cleaning.
Condenser Coil Guard
Inspect for cleanliness, obstructions,
Before
Guard requires
4
damage, and security of attachment.
cleaning, is obstructed,
Report damaged condition to Unit
damaged, loose or
Maintenance personnel.
missing.
Evaporator Air
Inspect for cleanliness, obstructions,
Before
Louver requires clean-
5
Discharge Louver
damage, and security of attachment.
ing, is obstructed, dam-
Report damaged condition to Unit
aged, loose or missing.
Maintenance personnel.
Evaporator Air
Inspect for cleanliness, obstructions,
Before
Louver requires clean-
6
Intake Louver
damage, and security of attachment.
ing, is obstructed, dam-
Report damaged condition to Unit
aged, loose or missing.
Maintenance personnel.
Condenser Louvers
Check for insecure mountings and
Before
Louvers require clean-
7
damaged louver blades. Report damaged
ing, are obstructed,
condition to Unit Maintenance
damaged or loose.
personnel.
Information Plates
Check for security and legibility.
Before
8
Condensate Drain
Inspect drains for obstructions. Remove
Before
Obstructions cannot be
9
Tubes
obstructions as required.
removed.
Control Module
Ensure knobs are in place and check to
Before
Knobs are missing or
10
see that switches function properly.
switches do not
Report damaged condition to Unit
function properly.
Maintenance personnel.
0011-00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals