UNIT MAINTENANCE SERVICE UPON RECEIPT

TM 9-4120-425-14&P

UNIT MAINTENANCE

0015-00

SERVICE UPON RECEIPT

THIS WORK PACKAGE COVERS:

Unloading, Unpacking, Checking Unpacked Equipment, Installation, Connect to Power Source, Operation

Check and Adjustment

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

Tool Kit, General Mechanics (Item 1, Table 2, WP 0118-00)

References

WP 0001-00

Equipment Condition

Main power source is disconnected.

UNLOADING

The air conditioner is packaged in a container designed for shipment and handling with the unit in an upright position.

The base of the container is constructed as a shipping pallet with provisions for the insertion of the tongs of a forklift.

The unit may be lifted by forklift, crane, or sling. To unload the air conditioner, perform the following steps.

Remove all blocking and tie downs that may have been used to secure the container to the carrier

WARNING

Do not allow the unit to swing while suspended from a lifting device. Failure to

observe this warning may result in injury to personnel and damage to the equipment.

CAUTION

Use care when handling to avoid damage to the air conditioner. If an overhead lifting

device must be used, use an appropriate sling so that the weight of the unit is

supported by the base of the shipping container.

Use a forklift truck or other suitable material handling equipment to remove the unit from the carrier.

UNPACKING

CAUTION

To protect the air conditioner and prevent damage, the air conditioner should be left

packaged until it is moved to the location where it is to be installed.

0015-00-1