 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-425-14&P
CANVAS COVER SERVICES
THIS WORK PACKAGE COVERS:
Removal, Inspection and Cleaning, Installation
INITIAL SETUP:
Maintenance Level
Unit
Materials/Parts
Cloth, lint free (Item 9, WP 0121-00)
Dry cleaning solvent (Item 16, WP 0121-00)
Tools and Special Tools
Tool Kit, General Mechanics (Item 1, Table 2, WP 0118-00)
WARNING
Disconnect air conditioner power supply.
REMOVAL
1.
Loosen tie strap (1) on the canvas cover (2) (if rolled) and unroll cover.
NOTE
Do not leave rolled up when wet. Spread canvas cover out flat until it is dry.
2.
Remove three screws (3), three lock washers (4) and three flat washers (5) to remove canvas cover (2) from top of
unit (6).
INSPECTION AND CLEANING
1.
Inspect for cuts, rips, tears, and fraying.
WARNING
Clean parts in a well ventilated area. Avoid inhalation of solvent fumes and
prolonged exposure of skin to cleaning solvent. Wash exposed skin thoroughly. Dry
cleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel
and property. Avoid repeated and prolonged skin contact. Do not use near open
flame or excessive heat. Flash point of solvent is 100F to 138F (38C to 59C).
2.
Inspect for stains, clean with detergent and water or dry cleaning solvent (Item 16, WP 0121-00) and lint free cloth.
NOTE
Do not roll up immediately after cleaning. Spread canvas cover out flat until it is dry.
0018-00-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals