|
|
TM 9-4120-425-14&P
CONDENSER COIL GUARD UNIT MAINTENANCE
THIS WORK PACKAGE COVERS:
Removal, Cleaning, and Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Dry Cleaning solvent (Item 16, WP 0121-00)
Tools and Special Tools
Tool Kit, General Mechanics (Item 1, Table 2, WP 0118-00)
Equipment Condition
Main power source disconnected.
WARNING
Disconnect air conditioner power input connector.
REMOVAL
Remove condenser guard (4) by removing eight screws (1) and eight lockwashers (2) and eight fasteners (3).
CLEANING
1.
Straighten condenser coil guard bent frame.
2.
Clean with warm soapy water or dry cleaning solvent. (Item 16, WP 0121-00)
WARNING
Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes and
prolonged exposure of skin to cleaning solvent. Wash exposed skin thoroughly. Dry
cleaning solvent, P-D-680 Type III, which is used to clean parts, is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin contact. Do
not use near open flame or excessive heat. Flash point of solvent is 100F to 138F
(38C to 58C).
0024-00-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |