|
|
TM 9-4120-425-14&P
DAMPER ACTUATOR CYLINDER
DIRECT SUPPORT MAINTENANCE REPLACEMENT - Continued
0068-00
WARNING
Ensure power source is disconnected. Ensure refrigerant system is discharged.
REMOVAL
1.
Loosen flare nut (1) on damper actuator cylinder (2).
2.
Remove two mechanical posts (3) and screws (4) from control assembly cables (5) and (6).
3.
Remove two nuts (7), two lockwashers (8) that secure the damper actuator cylinder (2) to angle (9).
4.
Remove damper actuator cylinder (2) from unit.
INSTALLATION
1.
Install damper actuator cylinder (2) to angle (9) with two lockwashers (8) and two nuts (7).
2.
Install control assembly cable (5), control assembly cable (6), and two mechanical posts (3) with screws (4).
3.
Apply oil to threads of damper actuator cylinder (2) and secure flare nut (1) to damper actuator cylinder.
4.
Replace filter- dryer (See WP 0066-00).
5.
Adjust damper actuator mechanism (See WP 0032-00).
6.
Replace top rear panel (See WP 0019-00).
7.
Service refrigeration system (See WP 0049-00 thru WP 0055-00).
0068-00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |