SERVICE UPON RECEIPT - TM-9-4120-430-140083

TM 9-4120-430-14

0014 00

SERVICE UPON RECEIPT

AIR CONDITIONER, COMPACT, HORIZONTAL

THIS WORK PACKAGE COVERS:

Unloading, Unpacking, Checking Unpacked Equipment, Installation, Connect to Power Source, Operation,

Check and Adjustment

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanics (Item 1, Table 2, WP 0067 00)

References

WP 0002 00 (Location of Main Components)

WP 0026 00 (Main Power Input Connector)

WP 0038 00 (Electronic Schematics)

Personnel Required

One

Equipment Condition

Main power source is disconnected.

UNLOADING

The air conditioner is packaged in a container designed for shipment and handling with the unit in an upright position.

The base of the container is constructed as a shipping pallet with provisions for the insertion of the tongs of a forklift.

The unit may be lifted by forklift, crane, or sling. To unload the air conditioner, perform the following steps.

1. Remove all blocking and tie downs that may have been sued to secure the container to the carrier.

WARNING

Do not allow the unit to swing while suspended from a lifting device. Failure to

observe this warning may result in injury top personnel and damage to the

equipment.

CAUTION

Use care when handling to avoid damage to the air conditioner. If an overhead lifting

device must be used, use an appropriate sling so that the weight of the unit is

supported by the base of the shipping container.

2. Use a forklift truck or other suitable material handling equipment to remove the unit from the carrier.

UNPACKING

CAUTION

To protect the air conditioner and prevent damage, the air conditioner should be left

packaged until it is moved to the location where it is to be installed.

0014 00-1