 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-430-14
0020 00
INSPECTION
1.
Inspect louver blades for bends or damage and straighten.
2.
Inspect evaporator air intake louver and evaporator air discharge louver for other damage.
CLEANING
WARNING
DRY CLEANING SOLVENT P-D-680
P-D-680 solvent vapors are toxic. Avoid prolonged or repeated breathing of vapors
or solvent contact with skin. Use only with adequate ventilation. Solvent is
flammable and should not be used near open flame. Fire extinguishers should be
readily available when solvent is used.
1. Clear obstructions from louver blades using dry cleaning solvent or warm soapy water.
2. Clean louver blades of obstructions.
INSTALLATION
Evaporator Air Discharge Louver
Align and secure louver (7) to housing using six screws (5) and six lockwashers (6), respectively.
Evaporator Air Intake Louver
1. Install evaporator air intake filter (4) into louver (3) by sliding the filter into either side of lover casing.
2. Align and secure louver (3) to housing using eight screws (1) and eight lockwashers (2), respectively.
END OF WORK PACKAGE
0020 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals