 |
|||
|
|
|||
|
Page Title:
Figure 1. Condenser Fan Assembly |
|
||
| ||||||||||
|
|
 TM 9-4120-430-14
0037 00
CAUTION
Take care to avoid damaging the condenser coil while removing motor and mounting plate from unit.
8.
Place the motor (3) and mounting plate (8) into position in the unit housing.
9.
Attach the shaft extension (2) with impeller (4) onto the shaft motor by loosely tightening setscrews (1).
10. Secure the motor mounting plate (8) to motor mount (7) with four flat washers (6) and capscrews (5).
11. Center the impeller (4) in the fan housing (11) while looking through the louver opening of the unit housing. Then
tighten the setscrews (1) on the shaft extension (2).
12. Reconnect wiring, See wiring list and schematic diagram WP 0038 00.
13. Connect the condenser louver (WP 0021 00).
14. Install top cover (WP 0018 00).
Figure 1. Condenser Fan Assembly
END OF WORK PACKAGE
0037 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals